Yesterday I showed a board I made for guests to sign at a wedding reception. Living on an island, we have many fishers here, especially those who go out for lobsters (yum!)
So, some brides here choose a nautical theme for their wedding day, including shells, lobster traps, buoys and anchors.
I’ve recently made two anchors to be used at wedding receptions, both are 31″ tall and 24″ across at the widest spot. One is white and one is mint green, both are distressed. I’ve also made a turquoise anchor, it was 27″ tall and distressed and covered with a grey stain, which gives a different look, that one was sold as a décor item to hang in someone’s home.
Here is how I put together the anchors, it’s quite a lot of work picking through the wood. I use basic lumber store strapping and try to find sections without too many knots or cracks.
I glue the pieces side by side, usually sections at a time.
I draw my pattern on the back and cut it out with a jigsaw. (Since a jigsaw cuts on the pull, or up stroke, it cuts neater on the underside)
I then paint the anchor, let it dry and sand it. Then I wipe on stain, let dry, paint names and cover with a clear coat.
Turquoise Anchor Covered With Grey Stain
White Anchor With Brown Stain
Light Green Anchor With No Stain
(Not as dark as photo shows on my screen)
As I wrote, the last two will be used for guests to sign at wedding receptions, and make a great keepsake.